What Problem boom barrier gate usually have

The parking lot system is now a highly intelligent product. The gate is the core electromechanical integrated equipment of the parking lot system. The undertaking the parking lot to control the movement of the vehicle's entry and exit to ensure the normal operation of the parking lot. So since it is mechanical and electrical equipment, there will always be some failures. Doum summarizes the common faults and treatment methods of customers in the use of the gate.

The normal state of a gate is higher than or lower than the horizontal position

If it is the case where the gate falls is higher than the horizontal position, first check the lower limit switch of the falling rod control whether the lower limit switch is loose and loose, and tighten the lower limit screw; whether the slice railings are shortened and folded. Adjust the length of the springs; re -debug the gate to the horizontal position and fix the screws. When lower than the horizontal position, check the limited switch screw loosely. See if there are heavy material garbage loads in the railings, the splitting of the motor snail wear of the channel gate, the self -locking performance deteriorates, the limit function fails, clean the railings, adjust the thread, and replace the turbine worm. Re -debug the correct position and fix the screws.

Erdao gate accepts signals, you cannot complete the action normally

This situation is often encountered. After receiving the signal, it is either not moved, or it cannot be reset after the action. There is also a signal to move to these abnormal slots. Do a few more backers and lift signals on the corridors, so that the gate gate is reset, the dial -switch after checking the gate, reset the dial switch, and adjust it to normal use; Damage, maintenance or replacement of the motor; check the electronic devices according to the electrical drawings of the gate, and replace and deal with electrical damaged circuit boards, capacitors, and wires.